RAGG'S PARTS & STUFF

(DETAIL PARTS IN ALL SCALES; HO; S; AND O)

ALL SCALES:

DP0001:   SYRINGES
These are the same syringes included in many of our fine kits and are great for dispensing Aleene's Tacky Glue.  They can be refilled and used over and over.  Each package includes two syringes, instructions for filling, and a handy wire for plugging the tip.  ($4.00/package)

                            Syringe                    Purchase DP0001

                    DP0002:   LOG SET #1
After years of unsucessfully searching for a scale log that looked "right", I elected to make my own masters and cast them from resin.  The logs come four to a package and require painting.  Instructions are included on each package, but can also be seen by clicking HERE.  Painting the logs is a matter of applying various washes, and is very easy to do.  The logs in SET #1 weigh an average of 0.6-ounces each.  The table, below, indicates the approximate size of the logs in this set for each scale.   The photo shows the logs after painting.  ($6.00/package)

SCALE:
 APPROXIMATE DIAMETER
APPROXIMATE LENGTH
HO
 3 - 4½ FEET
 34 FT.
S
 2½ - 3 FEET
 25 FT.
O
 2 - 2½ FEET
 19 FT.

                                                                                                        Log Set #1                  Purchase DP0002

         DP0003:   LOG SET #2
These logs are identical to those of Set #1, but larger.  They come unfinished, four to a package, and weigh an average of 1.0-ounces each.  The table, below, indicates the approximate size of the logs in this set for each scale.   The photo shows the logs after painting (click HERE for more information on finishing the logs).  ($8.00/package)

SCALE:
 APPROXIMATE DIAMETER
APPROXIMATE LENGTH
HO
 3½ - 5½ FEET
 41 FT.
S
 2¾ - 3 FEET
 30 FT.
O
 2 - 3 FEET
 23 FT.

                                                                                                      Log Set #2                        Purchase DP0003

DP0004:   BENCH TOP ORGANIZER
With three different tier heights, 24 cells, and 8 movable cell dividers, this organizer provides plenty of room and flexiblility to store and organize those tools you need to build great models, keeping them at your fingertips and unclutterng that work area.  It measures 12-inches wide x 4¾-inches deep x 3-inches high at the back.  Laser-cut from 4-ply matboard.  Assembly required (instructions included).  ($16.00)

                                                                                                  BTO main                         Purchase DP0004

          DP0005 & DP0006:   RAGG'S MUGGS -- 2009, 2010
Ragg's Muggs started in 2009 with the first featuring Rio Grande Southern's #455 climbing Lizard Head Pass, as depicted by Herschel Scott of Railroad Art by Scotty, available in either a Midnight Black or a Hunter Green color scheme.  The 2010 mug ("02") is a Burgundy paint scheme featuring Bob Richardson's photo of RGS #20 taking on water at Bear Creek, Colorado, from the Denver Public Library's Western History Collection.  The mugs will be available until the current supply is exhausted.  These aren't run-of-the-mill coffee cups with a simple picture printed on them.  They're heavy duty -- truly a railroader's mug.  Custom made for us in America, each is individually hand thrown and kiln-fired.  They're very, very durable:  lead and cadmium free, microwave, dishwasher, oven and freezer safe.  All mugs sport a "marbleized" rim.  The medallion art is done using a special process developed by the potter and is extremely crisp and highly detailed -- you can read the Sunrise herald on the "01" mugs and see the engine crew at work on the Burgundy mugs.     ($16.00 each until gone)


2009 Black Mug                Purchase DP0005


2009 green Mug               Purchase DP0006



2010 mug      Purchase DP0007


DP0008:   RACK & PINION
Made specially for our Hukill Mine kit by our friend John Socha-Leialoha, our Rack & Pinion detail is now available separately.  Adaptable to HO, S, and O-scales, the set consists of two lengths of "rack" gears, two pinions, two pillow blocks, and a hand wheel.  Each rack measures 0.07-inches wide and is 0.75-inches long.  The handwheel is 0.25-inches in diameter.   (1/$4.00)

                                                                                                  Rack & Pinion     Rack $ Pinion Sprue

Purchase DP0008
DP0009:   DOUBLE-SIDED STICKY TAPE
This is about the 5th generation of sticky tape we've used and the first we dare to offer as a separate item.  It's STICKY stuff!  The best use we've found for the stuff is to hold down corrugated siding on walls and roofs.  It works.  The roll measures 1/2-inch wide x 180-feet long.  That should be enough to last you several years!  (1 roll/$10)

                                                                                                     sTICKY tAPE                     Purchase DP0009


HO SCALE:


DP3002:   CHIMNEY
From our Ridgway Depot kit, this chimney measures 0.33 x 0.25-inches at the base and stands 1.1-inches tall.  We have a few left that are cast in metal, but are now making them from resin.  ($4.00/package of TWO)

                            Chimney                                                       Purchase DP3002


DP3003:   SMOKE JACK
From our Ridgway Depot kit, this resin smoke jack measures 0.25-inches in diameter at the base and stands 1.36-inches tall.  ($4.00/package of THREE)

                            Smoke Jack                                                       Purchase DP3003


DP3005:   CHIMNEY
From our Bel Air Depot kit, this resin chimney measures 0.4 x 0.4-inches at the base and stands 1.18-inches tall.   ($4.00/package of ONE)

                            Chimney                                                       Purchase DP3005
S SCALE:

DP2012:   BAGGAGE WAGON
Developed for our S-scale Depot Detail Set, this kit includes 32 laser-cut and injection molded parts and instructions.  I believe it to be the most detailed baggage wagon available in S-scale.  Place it in front of any depot to make the scene much more realistic and believeable.  ($12.00 each)

                            Baggaga Wagon                                                       Purchase DP2012



DP2013:   CHAIRS
This is a kit of six laser-cut wooden chairs, assembly required.  The kit includes two each of three different types of chairs.  Assembly instructions included.  ($8.00/package of six chairs)

                   Chairs                        Purchase DP2013



DP2014:   TABLES
This is a kit of three laser-cut wooden tables.  Each table is different:  a 36-inch round pedestal table; a 30-inch square table with round legs; and, a 30 x 48-inch rectangular table with square legs.  Assembly instructions included.  ($4.00/package of three tables)

                            Tables                                  Purchase DP2014


DP2015:   PLATFORM SCALE
Another highly detailed kit (get those Optovisors ready!), this is the ONLY true S-scale platform scale available that I know of.  Like the baggage wagon (above), it was developed for our S-scale Depot Detail Set.  The kit includes 16 laser-cut parts, four cast wheels, and instructions.  When assembled, it stands a scale 4-feet-4-inches tall.  ($4.00 each)

  Platform Scale                                 Purchase DP2015


DP2016:   CONOCO (Truck) Tank kit:
To go along with our Dolores CONOCO Bulk Oil Plant, John Socha-Leialoha developed this retrofit kit for PBL's 1934 Ford Stake Body Truck (#MSA-103).  The kit consists of plastic injection molded parts (tank and fittings, side troughs, oil cans), decals, and instructions.  The PBL truck body is not included.  ($12.00 each)

                                                                      Tank Truck -_S                   Purchase DP2016


O SCALE:
DP1013:   CHAIRS
This is a kit of six laser-cut wooden chairs, assembly required.  The kit includes two each of three different types of chairs.  Assembly instructions included.  ($10.00/package of six chairs)

                   Chairs                        Purchase DP1013



DP1014:   TABLES
This is a kit of three laser-cut wooden tables.  Each table is different:  a 36-inch round pedestal table; a 30-inch square table with round legs; and, a 30 x 48-inch rectangular table with square legs.  Assembly instructions included.  ($6.00/package of three tables)

                            Tables                                  Purchase DP1014




RETURN TO MAIN PAGE